2x72 Belt Grinder 110V/60Hz 2.25 Hp Motor with VFD



Sorry, this item is out of stock

World First 2x72 Belt Grinder with HBTS (Hydraulic Belt Tensioning System) with Adjustable Tension Strength.

Belt Grinder Chassis:

  • The Belt Grinder chassis and chassis parts including the tooling arm slots are ALL made  from 1/8" steel ,CNC machined and TIG  welded.
  • The Belt Grinder chassis can accept two tooling arms.
  • Tooling arm slots size is 1.6" x 1.6" (41*41mm) square and can accept either 1.5" (38.10mm),or 1.57" (40mm/included) Square Solid Aluminum tooling arm.The Tooling Arm Slots are NOT made from square tubing.
  • Industrial  grade Powder Coating.

Belt Grinder Tooling Arm:

  • CNC machined  from 6061 Solid Aluminum.
  • Size:1.57"*1.57" (40mm*40mm).Length:19.7" (500mm).

HBTS  (Hydraulic Belt Tensioning System) :

  • Our Belt tensioning system is HBTS (Hydraulic Belt Tensioning System) with two speed control  valve for Adjustable Tensioning Strenght and Latching  Speed.System Hydraulic oil resistance to -49°F (-45℃).Work cycle:500,000+ cycles.
  • Tracking wheel holding arm made from 1/4" (6.3mm) HARDOX 400 Carbon Steel for long life span.
  • Stainless  Steel  Spring  mounted  tracking drive screw, that is made from Carbon Steel.
  • Motor Type:TEFC (Totally Enclosed Fan Cooled).
  • 9 Pole High Torque Servo Drive Motor 1600W (2.25 Hp)
  • Input voltage:Household 110V/60Hz (US plug).
  • Max Speed (RPM): 3000 (adjustable/100RPM).
  • Max Speed Preset Function.
  • Reverse Rotation Function.
  • Thermal & Overload Protection.
  • High Torque at All Speeds.
  • The New Generation of limited in size and weight, High Torque High Efficiency & up to 75% Energy Saving Drive Motors.
  • 4" High Precision Aluminum Drive Wheel attached on the Motor Shaft Ready to Drive your grinder.
  • Led Spot Working Light attached with ON-OFF and Brightness Control from the Main Control Unit.The industrial grade flexible gooseneck arm is 29.5" (75cm) long.

 D-Backing Plate:

  • Precision CNC cut from 3/8" Steel.
  • Wheel mounting holes are 1/2-13.
  • The diameter of the centre mounting hole is 1/2".
  • U-shaped adjusting slot:1/2" (can accept 1/2"  or 3/8" bolt).
  • Satin black painted.

Idler wheels:

  • Size: 2" in diameter  and 2-1/4" wide. The core is made from 6061 Aluminum with 85A duro industrial grade PU rubber coating. The industrial grade PU rubber it has 3 times more lifespan than the natural vulcanized rubber and is ideal for such kind of applications.
  • The bore of the bearings is 1/2".
  • 1/2"-13 wheels mounting bolts and nylon spacers included.

Ttacking wheel:

  • Size: 3" in diameter  and 2-1/4" wide. The wheel is made from 6061 Aluminum CNC turned
  • The bore of the bearings is 1/2".

Platen Mounting Bracket:

  • Precision CNC cut from 5/32" Steel.
  • Size: 8" long & 2.36" wide
  • Mounting holes 1/4" (1/4"-20 mounting bolts & nuts included).
  • A metal shelf  1/4"   installed at the bottom side of the platen to support the high temperature  ceramic glass.
  • Satin black painted.

 Ceramic Glass:

  • Ceramic Glass Platen liner size: 2" x 7.76"X0.158 " (1pcs included).
  • Temperature (max) :1382F (750C).
  • Mounting tape: Double sided high temperature thermal transfer,high strength tape (2pcs  included).

Tool Rest:

  • Precision CNC cut from 3/8" Steel.
  •  Designed to fit to 1.5"x1.5" tooling arm.
  • Work area size:7"x3.15"
  • Satin black painted.
  • Made in EU.
  • Please note that most of the parts are factory pre- assembled.Final alignment it needs during the final assembly.2x72 belt not included in the package.
Calculated at checkout